Support angles and hangers
Support angles and hangers are the common products for suspension of rectangular or spiral ducts. They are usually attached to the ductwork by screws or rivets.Hangers are a cost-effective and easy-to-use solution for the suspension of ventilation ducts.The Gebhardt support angles and hangers are fully assembled with improved sound insulation and have been tested to DIN 4109 (structure-borne sound test on request) The average improvement is: Between 125 Hz and 4000 Hz: 7 dB; Between 500 Hz and 4000 Hz: 10 dB (tested by the Institut für Schall- und Wärmeschutz, Essen). All hangers and support angles are galvanised and assembled with a patented, screwable insulation element with washer. Suitable for use of threaded rods Ø 10 mm.
-
Single support angle
- Art. no.: 313110010
- Single support angle for rectangular ductwork
- With mounted insulation element
- Length 90 mm
- Galvanised steel
- PU 100 pcs
-
Double support angle
- Art. no.: 313120010
- Double support angle for rectangular ductwork
- With mounted insulation element
- Length 60 mm
- Galvanised steel
- PU 100 pcs
-
Tube hanger
- Art. no.: 313130010
- Tube hanger for spiral tubes
- With mounted insulation element
- Galvanised steel
- PU 50 pcs
-
Trapeze hanger
- Art. no.: 313130020
- Trapeze hanger for spiral tubes
- With mounted insulation element
- Galvanised steel
- PU 100 pcs
-
Insulation element
- Art. no.: 313508000
- With washer
- For threaded rods M 10
- Natural rubber with thread
- PU 200 pcs
Slide mount
Fast. Practical. Stable. The slide mount provides significant material and time savings compared to conventional mounting systems. The suspension is carried out at the most stable position, on the flange frame. As a result of the double function, i.e. hanger and cleat in one, there is also an improvement in deflection. Mounting takes place without the use of screws and as such, the surface of the duct is not affected. This means: even greater tightness of the duct system. Use a hammer to set the slide mount. Suitable for all Gebhardt flange systems.
-
Slide mount
- Art. no.: 313500010
- Galvanised steel
- Two functions: cleat and hanger in one
- Length 155 mm
- Max capacity: 785 N per attachment
- PU 50 pcs
