STRUTS/CHANNEL SECTIONS
UNIVERSALLY APPLICABLE - HIGH LOAD CAPACITY
Thanks to the combination perforation with round and slotted holes, our mounting rail proves to be a versatile solution for the professional and simple suspension of angular ventilation ducts. To ensure a high load-bearing capacity and the best statics, all our mounting rails are made of 1.75 mm thick galvanised slit strip. As an option, you will find matching insulating rubbers in our range to prevent a sound bridge or sound decoupling, as well as end caps for a visually clean finish to the mounting rail and to reduce the risk of injury at cut edges.
KOMBI perforation
Thanks to the perforation with round and slotted holes, the mounting rail can be used variably.
Installation options
For mounting pipelines, ventilation ducts, cable ducts, etc.
Dimensions
Available in various sizes including 41x21, 41x41, 41x62.
Struts/Channel sections
Gebhardt-Stahl channel sections allow for the correct and simple suspension of rectangular ventilation ducts and other pipeline systems. The perforation with round and slotted holes makes the Gebhardt struts versatile.
A great advantage when using struts for suspension of ductwork is the fact that no additional screws or rivets affect the air duct. No additional sealing measures are necessary and the air tightness of the ducts remains unaffected. For best stability and structural values, all channel sections are made from galvanised steel 1.75mm. Load capacity certificate is available upon request.
Suitable insulation rubber for interrupting sound bridges is also available as well as protective caps for reducing the risk of injury from cutting edges. Deviating hole patterns, dimensions and material thicknesses upon request.
- Art. no.: 305020010
- Galvanised steel
- Width x Height: 30 x 20 mm
- Gauge 1,75 mm
- Perforation: slotted hole 20 x 15 mm, round hole 10,75 mm
- Art. no.: 305050010
- Galvanised steel
- Width x Height: 30 x 30 mm
- Gauge 1,75 mm
- Perforation: slotted hole 20 x 15 mm, round hole 10,75 mm
- Art. no.: 305080010
- Galvanised steel
- Width x Height: 30 x 45 mm
- Gauge 1,75 mm
- Perforation: slotted hole 20 x 15 mm, round hole 10,75 mm
- Art. no.: 305330013 (3.000 mm)
- Art. no.: 305360016 (6.000 mm)
- S250 GD
- Width x Height: 41 x 21
- Gauge: 1,5 mm
- Perforation: 30 x 13 mm
- Art. no.: 305430013 (3.000 mm)
- Art. no.: 305460016 (6.000 mm)
- S250 GD
- Width x Height: 41 x 41
- Gauge: 1,5 mm
- Perforation: 30 x 13 mm
- Art. no.: 305350013 (3.000 mm)
- Art. no.: 305380016 (6.000 mm)
- S250 GD
- Width x Height: 41 x 21
- Gauge: 2,5 mm
- Perforation: 30 x 13 mm
- Art. no.: 305455013 (3.000 mm)
- Art. no.: 305485016 (6.000 mm)
- S250 GD
- Width x Height: 41 x 41
- Gauge: 2,5 mm
- no perforation
- Art. no.: 305450013 (3.000 mm)
- Art. no.: 305480016 (6.000 mm)
- S250 GD
- Width x Height: 41 x 41
- Gauge: 2,5 mm
- Perforation: 30 x 13 mm
- Art. no.: 305490016
- S250 GD
- Width x Height: 41 x 62
- Gauge: 2,5 mm
- Perforation: 30 x 13 mm
- Length: 6.000 mm
- Art. no.: 305495016
- S250 GD
- Width x Height: 41 x 82
- Gauge: 2,5 mm
- Perforation: 30 x 13 mm
- Length: 6.000 mm
OUR EXPERTS IN THE FIELD OF HVAC COMPONENTS
Our focus on continuous development has allowed us to grow over the past decades from a supplier of ventilation components to a leading company in the field of air duct profiles and a full-range supplier in the field of ventilation accessories.
In the course of this development, however, one thing has always been in the foreground - the pursuit of professional, high-quality and individual solutions for you, our customers and partners.